VX & AX Sealing Rings

VX ring gaskets are used in H4 hydraulic connectors. The VX ring gasket is used at the base of the wellhead and riser connector when the hubs are separated. It’s considered a face to face pressure energized gasket that allows face to face contact between the hubs. The VX style gasket was originally made by Vetco. Now Scorpio offers the same quality and performance of Vetco at an aftermarket price.


VX ring gaskets for sale at Scorpio are constructed using 316 Stainless Steel & Soft Iron.
Soft Iron, Low Carbon Steel, SS410, SS304, SS316(L), SS347, F5, Copper, Aluminum, Inconel 800, 625, 600,825, Monel 400, Titanium, Nickel 20, Hastelloy C276, B3, Zirconium 702 etc.


Each VX ring gasket weighs around 130 LBS.
Ax Ring Gaskets Specification
AX Ring Gasket is the solid gasket by forging, heat treatment and machining. The gasket is the special ring joint gasket which suitable for offshore drilling manufaturing system.AX Ring Gasket is one of the Octagonal Ring Joint Gaskets. Mental gaskets with the radial tight sealing effect which include type VX Ring Gasket and CX Ring Gaskets.


AX Ring Gasket is pressure energized, that is to say the higher the pressure is the better the seal perfomance;
AX mental gasket is usually used for hydraulic connector, instead of heavy API interface flange with time-consuming install;
AX mental gasket is light weight and save time. It's used for the mouth of well connected;
AX mental gasket can replace of API Ring Gaskets;
The hardness of AX Ring Gaskets must be 15~20HB lower than the mating flange face hardness;
The seal faces of AX Ring Gasket including the bevel faces shouldn't have the scratches, knock marks, cracks and defects. Its surface roughness shouldn't be larger than Ra 0.8.


The AX Ring Gaskets are primarily used in the oil, gas, petrochemical and offshore industries. They are also commonly used on valves, pipe-work assemblies and vessel joints and AX Ring Gaskets are used to seal flanged connections subject to high pressures and temperatures.


It can be provided any standard and non-standard sizes, Including API 6A, API 17D, ASME B16.20, DIN 2693-67, JPI-7S-23-72 and other standards